World’s Oldest Pet Cemetery Unearthed in Ancient Egypt

A dig near the famous ancient Egyptian port city of Berenice has turned up a mysterious animal cemetery dating to the 1st century AD.

It emerged in the dunes to the northwest of the important ancient Red Sea port of Berenice, which saw traffic from far and wide, with ships coming from East Africa, Europe, and India.

Ninety percent of the nearly 600 burial sites explored unearthed cats, though there were also dogs and macaque monkeys, a few of them definitely imported from outside Africa.

The find was published by a team led by Marta Osypinska, an archaeozoologist at the Polish Academy of Sciences, in the journal World Archaeology.

Several characteristics make this discovery uniquely mysterious. For one thing, none of the animals was mummified, as they are at other archaeological sites, such as temples. Here, too, there was a greater variety of species and funeral practices. Also, unlike at other burial sites, there were no humans among the beasts.

While the animals obviously had a special place in their society, the paper says, to think of them the way we think of pets today might not be quite right. These “companion animals,” as the researchers call them, probably played more of a utilitarian role than the pampered pets of today.

Still, the animals were definitely treated well in death.

They’re accompanied by craft objects like pottery that are thought to have protected them, and the creatures also have adornments like beaded necklaces made of stone, glass, and faience and shell. They were uniformly found in a sleep-like position.

Other experts second the conviction that the site is truly something new.

“It’s something completely different than what we see elsewhere,” Bea De Cupere, an archaeologist at the Royal Belgian Institute of Natural Sciences in Brussels, who was not involved with the project, tells Atlas Obscura.

“I’ve seen thousands and thousands of bones in my career, and maybe 10 cats,” she says.

According to her research, the ships that came and went in these ports usually had cats aboard for pest control, suggesting that these may have been partly working animals.

Ancient Egyptian Head Cones Were Real, Grave Excavations Suggest

Researchers have revealed details of mysterious cone-shaped headgear discovered in the ancient Egyptian city of Amarna.

“Ancient Egyptian art frequently depicted people wearing cone-shaped headgear, but none had ever been found,” the researchers explained in a statement emailed to Fox News.

Archaeologists from the Amarna project have been working with Egypt’s Ministry of Antiquities to analyze the mysterious head cones. A head cone was discovered at a grave in Amarna in 2010 and another head cone was uncovered at the site five years later.

“This confirms the objects actually existed, which some researchers were sceptical of,” the researchers added in the statement. “Instead, they thought they were just artistic additions, like Christian halos.”

“It is unknown why these cones were included in the burials,” the experts continued. “They may have been thought to purify the wearer so they could engage with the rituals and deities of the afterlife. Alternatively, they could be connected with ideas of fertility and resurrection.”

A paper on the research is published in the journal Antiquity.

Egypt continues to reveal new details of its right history. Archaeologists, for example, recently discovered a long-lost 2,200-year-old ancient temple linked to Pharaoh Ptolemy IV.

In a separate project, an ancient fortress built by Pharaoh Ramses II is revealing its secrets. Archaeologists recently uncovered an ancient cemetery near the famous Giza pyramids just outside Cairo.

In another project, experts uncovered the 2,500-year-old remains of a powerful high priest in dramatic fashion.

The opening of the priest’s stone sarcophagus was broadcast by the Discovery Channel during “Expedition Unknown: Egypt Live,” a two-hour live event. Archaeologists discovered what they describe as an “exquisitely preserved” mummy inside the sealed sarcophagus, covered in gold banding.

The incredible find was made at Al-Ghorifa, a remote site about 165 miles south of Cairo. Located within the inner chambers of the burial site, experts accessed the sarcophagus via a network of ancient tunnels.

Elsewhere, archaeologists found a large ram-headed sphinx that is linked to King Tutankhamun’s grandfather. In other projects, a teenage girl’s skeleton was discovered in a mysterious grave near the Meidum pyramid, south of Cairo.

In April, experts announced the discovery of dozens of mummies in ancient desert burial chambers. Archaeologists also recently explained the strange brown spots on some of the paintings in King Tutankhamun’s tomb.

In January, archaeologists announced the discovery of ancient tombs in the Nile Delta north of Cairo. In a separate project, two ancient tombs dating back to the Roman period were uncovered in Egypt’s Western Desert.

Archaeologists discovered a stunning sphinx statue at an ancient temple in southern Egypt in a separate project.

Last summer, experts unlocked the secrets of a mysterious ancient ‘cursed’ black granite sarcophagus. The massive coffin, which was excavated in the city of Alexandria, was found to contain three skeletons and gold sheets with the remains.

Archaeologists also found the oldest solid cheese in the tomb of Ptahmes, mayor of the ancient city of Memphis.

A mummy buried in southern Egypt more than 5,000 years ago has also revealed its grisly secrets, shedding new light on prehistoric embalming practices.

1,700-Year-Old Sock Spins Yarn About Ancient Egyptian Fashion

There are old socks, and then there are old socks. This stripy sock, discarded around the 3rd or 4th century, falls into the latter category. Fished out of a landfill during the 1913-1914 excavation of the Egyptian city of Antinooupolis led by English papyrologist John de Monins Johnson on behalf the Egypt Exploration Fund, the sock ended up in the collections of the British Museum in London.

While previous research had pinpointed its age, not much else was known about the sock—or its partner, which presumably was lost to time (and did not succumb to whatever the late antiquity period equivalent is to being swallowed by the dryer).

Now, new research is unraveling the sock’s secrets. As Caroline Davies reports for the Guardian, a group of museum scientists hoping to better understand ancient Egyptian clothing manufacture and trade practices decided to analyze the dyes in the sock, along with several other textiles dating between about 250 and 800 A.D.

Avoiding older techniques that required an invasive approach, they utilized multispectral imaging, which only needs to scan the surface of artifacts to test for pigments.

Even if certain colors have degraded to the point that they’re not visible to the naked eye, multispectral imaging can detect minute color traces under different wavelengths of light. Think of it as a camera for invisible ink.

Sure enough, the analysis revealed that the sock contained seven hues of wool yarn woven together in a meticulous, stripy pattern. Just three natural, plant-based dyes—madder roots for red, woad leaves for blue and weld flowers for yellow—were used to create the different color combinations featured on the sock, according to Joanne Dyer, lead author of the study, which appears in the journal PLOS ONE.

In the paper, she and her co-authors explain that the imaging technique also revealed how the colors were mixed to create hues of green, purple and orange: In some cases, fibers of different colors were spun together; in others, individual yarns went through multiple dye baths.

Such intricacy is pretty impressive, considering that ancient sock is both “tiny” and “fragile,” as Dyer tells Davies. Given its size and orientation, the researchers believe it may have been worn on a child’s left foot.

The sock offers insight beyond what was all the rage among youth fashion approximately 1,700 years ago. Analyzing its construction yields a lot of insight into the time period in which it warmed tiny feet.

The period that comprised Egypt’s late antiquity is rich with history: During this time, Egypt experienced an enormous upheaval that ended with the Muslim conquest of the region in 641 A.D.

“These events affect the economy, trade, access to materials,” Dyer tells Davies, “Which is all reflected in the technical makeup of what people were wearing and how they were making these objects.”

As it happens, socks are believed to have been a mainstay for humans since the Stone Age—though the earliest versions, which were just animal pelts or skins meant to be wrapped around feet, may not bear much resemblance to that Fruit of the Loom six-pack you have in your sock drawer.

The ancient Egyptians employed a single-needle looping technique, often referred to as nålbindning, to create their socks. Notably, the approach could be used to separate the big toe and four other toes in the sock—which just may have given life to the ever-controversial socks-nd-sandals trend.

Melting Stone With Plants: Was the Mythical ‘Green Chisel’ A Real Ancient Tool?

Archaeology is not an exact science. It is full of doubts, uncertainties, surprises, and unanswered questions. One of its unsolved mysteries concerns the methods of ancient stone work, which is lost in the mists of time. All existing stones, listed in the Mohs Scale according to their hardness – from the 1st degree (softest, talc), to the 10th (hardest, diamond) – are workable with tools made of something harder than them. This means they are worked and altered with a mineral tool with a higher degree of hardness, or more often with a metal tool.

From the 1st to the 6th degree (mostly calcareous stones), copper or bronze tools are enough. But for stones from the 7th upwards (much harder and mostly siliceous) we need iron or steel tools. In this article, we are interested in the examples of how ancient stoneworkers worked the oldest, hardest stones.

Why the Hardest Stones?

Many of these finds date back to periods or geographical contexts where iron did not exist: i.e. in the Old World before 1200 BC and in the New World before the Conquest. Nevertheless, surprisingly, just the hardest stones were used by ancient peoples in those situations – and with great skill and extremely sophisticated workmanship. Indeed, it seems that they were even preferred, despite the difficulties in working them (during which, moreover, they can chip badly). It was as if shaping them was commonplace for the ancient stonemasons.

We have emeralds, quartzes, obsidian jewels, and amulets with very fine incisions and carvings; slender vases in syenite with very thin sides with a smooth, impeccable finish; the cup of King Narmer , in porphyry; diorite tablets with bas-reliefs on a perfectly smooth background, and long texts in minute hieroglyphic or cuneiform characters, traced with perfect graphics, without smudges, as if they had been stamped rather than carved.

And then there’s the disquieting geometries in diorite of Puma Punku, of maniacal rigor and the incredible puzzles of the Peruvian walls (and Egyptian and Japanese walls too), with millimeter-precision junctions between the immense andesite blocks with 20, 30, or even 40 corners. There’s also basaltic boulders three meters high as the grandiose Olmec heads. The 70-ton granite blocks with very clear cuts, that were emptied to create the sarcophagi of the Serapeum of Saqqara, whose even the internal surfaces are as smooth as the outer ones, are another marvel. The shiny cylinders of ‘carrots’ also appear to be dug into granite by drills that seemed to have been as fast as their modern counterparts.

All this work was done by ancient stonemasons on hard siliceous rocks – up to the 8th or 9th degree of the Hardness Scale.

None of this, in theory, was feasible by just muscular strength and with the ancient tools in the archaeological record. The stone workers apparently manipulated hard stone with a high degree of skill – but they were without strong saws, bits, special steel drills, and motor-powered tools. It simply seems impossible. But how did they do it? With what?

Inferences and Theories

Obviously, that inexplicable technical perfection has generated a lot of inferences and theories of every kind, many of which arbitrarily transpose means, methods, and knowledge of today into the most distant past. We see a hypothesis suggesting stone was ground, mixed with water, and cast into molds (with a disproportionate expenditure of energy). In another one, the stone is said to be softened by a mix of sour plant juices and shaped, then it would harden.

Other suggestions say the ancient people used lasers, radioactivity and so on, or that they had very advanced machines provided by a mysterious lost civilization. And, of course, there’s the hypothesis that the work was done with the assistance of aliens. But no evidence has ever been found for such devices.

To this technological enigma, excluding fanciful speculations, I intend to offer an explanation in line with ‘ Occam’s razor ’: with all factors being equal, the solution to a problem is the simplest one.

Using Acid to Work the Hardest Stones

The thesis is that the only practical system available to act on the mentioned minerals, refractory to (or unmanageable by) physical action, was chemistry – specifically exploiting the natural capacity of certain elements to break down other materials due to their incompatibility; incompatible chemical principles put in contact with each other will react by destroying each other. That is, to cause a guided reaction, and to stop it at the right time: the stone would be disintegrated by treating it with a corrosive substance (one incompatible with it) that chemically attacked it, instead of, or before tools were used on it.

In short, an acidic chemical would do most (or part) of the work necessary to produce the desired effect – all while saving time, effort, and material. This, as we shall see, was entirely within the reach of the ancient craftsmen , even if it is not clear how they came to understand that natural phenomenon and its possible advantageous uses.

The fact is that this intuition was, apparently, operatively implemented, and in a very simple and not at all mysterious way. Because – unlike other proposed solutions – the acid does not change the structure of the stone, but literally liquefies it and, if carefully managed, it can eliminate from a block all the superfluous parts (or materials) not included in the project design.

The difference compared to manual tools is that it does it without friction – it’s done at the atomic level . That’s all.

We have both direct (material) and indirect (immaterial) clues of the reliability of this hypothesis.
Direct clues are the concrete evidence of the use of that method in artifacts and buildings. The results of the process described above are stunning when they are observed with the naked eye.

But I have no doubt that when they are enlarged under a microscope they would show the uniformity of a ‘controlled dissolution’ made by an acid even in the hardest parts of the stone to reach. This is in contrast to scratches which would have been made by metal tools. As a ‘chemical chisel,’ acid can creep everywhere.

As I said above, there is no archaeological evidence for modern technologies and tools used in the ancient past. But acid has always existed in nature. If we wanted to, we could still use it today.

With it, we could – drop by drop – engrave and pierce precious stones, create the empty cavity of a vase and smooth its sides, model statues, and even make coffins out of huge granite blocks. Layer by layer the acid would consume the inside of the stone and smooth it; or, if we wanted to mark it instead, we could cover it with a film of wax (which doesn’t react to it), scratch away the wax in areas we wanted to mark the stone, and then pour acid on those areas.

This could explain how Moses engraved the Tables of the Law, as the Babylonian Talmud, Sotah 48b,   describes how Shamìr is used to cut stone. To write on stone at that time, it would make sense that Moses used the same method of first marking the letters with ink, then passing Shamìr over them, and then they were engraved.

By penetrating natural fissures with acid, we could remove boulders from their rocky bed and cut them as we wish. And maybe we could use it in the building industry in the form of a corrosive paste or mortar which disappeared after having eaten away the roughness and smoothed away the differences in height between boulders. It would eliminate the space needed for joints and give the structure the appearance of a dry-stone wall.

I believe this was the only way that it was possible for the ancient stonemasons to work very hard silicon-based stones. It would also be used for softer stones like limestone, marble, and alabaster, since the same acid also attacks all other types of stone. Indeed it attacks every material except gold, lead, and wax.

For us, it is important because it is the only natural solvent for silicon – and that aspect allows us to identify it with certainty because there is nothing else capable of so much. It is hydrofluoric acid (chemical symbol HF), one of the most aggressive, extremely reactive, caustic, and poisonous chemicals. The ancient stonemasons used that. That was their secret tool.

Sourcing the Secret Stonework Tool

But how did they get it? What did they extract it from?

Indirect clues will indicate its origin. Ancient legends speak of a magical ‘something’ that could weaken or destroy every type of stone: a ‘something’ that, from time immemorial, was reserved for the mighty ones and unknown to everyone else. But at a certain moment, it was replaced by iron, abandoned, and eventually forgotten. That’s how things happened in the Old World at least; in the New one , history handed it over to oblivion.

There isn’t much to tell though.

There is a transient reference to the ‘farr’ of Persian king Zal, which was a symbol of his celestial investiture, which acted as HF. Another, no less scanty reference mentions an obscure ‘plant mixture’ conceived by Egyptian scholars to soften stone. This was perhaps the same ‘unknown cement’ that was thick as a sheet of paper and that the Arab scholar Abd el-Latif (12th century) said connected the stones of the Great Pyramid, in which some ‘plant residues’ have recently been found. This is all from Egypt, although there traces of the technique abound.

Instead, we find a lot of data (certainly from Egyptian sources) in myths and texts, including the Bible, of ancient Israel, however there this discovery – a gift of God, which later disappeared – was only used twice. The Jews called it Shamir.

Shamír

The first time Shamir was used was to engrave the Tables of the Law and the names of the 12 tribes on the gems of priestly vestments. The second time was to cut the stones of the Temple of Solomon as God commanded: these were calcareous stones, but the gems were almost all siliceous, which confirms that Moses used hydrofluoric acid – Shamìr.

The description of its appearance is rather vague and ambiguous, but its behavior isn’t. It worked the hardest stones and left perfect, smooth, residue-free surfaces; it had to be kept in a lead basket (an airtight vase would have exploded), and insulated with wool and bran; it had heavy collateral effects (it scalded Moses and poisoned and killed the Temple workers); in the long run it became inactive.

This is the unequivocal picture of the action of that powerful acid, but it does not help us to understand its origin and nature.

Excluding that it was, as hypothesized, mineral (diamond) or animal (worm), maybe it was plant-based?
Some writings related to Shamìr warn not to identify it with Euforbia, a stinging shrub; but why would they do that, if not because it was also a plant? And unfortunately, the information stops there.

Connecting Shamír and the Pito of Peru

But the astonishing answer comes, unexpectedly, from distant Peru, where oral tradition says ever since the ‘ancients’ started to assemble the stones of their huge walls, they used the mysterious Pito, a plant that was described as a low creeping grass with red leaves.

The tradition affirms that Pito or, rather, its extract, is capable of melting every stone (the explorer Percy Fawcett talks about an amphora stolen from an Inca tomb, incidentally broken, and of how the liquid leaked out and dissolved the stone below) and iron too. It also declares that – as God had given Israel Shamir to work on the Temple – the local gods had once given men, in order to alleviate their labors, two plants: coca and Pito; not to be confused, however, with the caustic Efedra. Does it remind us of something?

Jewish myths mention a wild rooster that used Shamìr to make many small holes in rocks in which to plant trees. In Peru they also associate Pito with a bird which, according to several witnesses, is accustomed to rubbing the leaves of the plant onto rocks with its beak: this softens the stone, in which then it digs itself a nest.

But there’s more. The wild rooster also used Shamìr to erode the glass slab placed upon its nest covering its little ones and the Peruvian bird did exactly the same with the Pito herb, but that slab was made of iron.

These similar narratives cannot be pure coincidence. In different contexts, these birds are apparently using two distinct corrosive chemical agents which act in exactly the same way in the stories. So, on both sides of the ocean, we have two elements with common characteristics and the same range of action: the unique capacity to attack silicon.

And now everything can be reduced to a simple syllogism: if two factors have the same effect on a third, it means that they are equal. Even the legends tell the same story. In short, the active component of Pito and Shamìr was the same.

Moreover, from the descriptions we have established that Shamir was HF and that Pito was a plant; therefore HF was derived from a plant. Ultimately both those substances – Pito and Shamìr – were actually only one with the same formula: hydrofluoric acid, HF, which was extracted from plants. However, they were probably not of the same species because the same plants do not grow in the two geographical areas.

But it is also true that over 40 plants of various species have high contents of the poisonous HF, which they absorb from soil and synthesize, to protect themselves from herbivores, in the form of a compound called fluoroacetic acid.

And to extract hydrofluoric acid from fluoroacetic acid is no more difficult than to make tea: you just have to boil the plant in water, distill the solution, and then concentrate it. HF dissolved in water is manageable, very carefully, at room temperature.

Shamìr/Pito: Continents Apart, Techniques in Common

At this point it is relevant to identify Shamìr and Pito with the richest HF spontaneous plants.

The most probable suspects are Dichapetalum in Africa and Palicourea in South America (coincidentally, the areas of our interest). Both of them are not very attractive and of little economic value, having no known uses (only as a rat poison for Dichapetalum). Today they are not the object of any particular attention.

But, in the mists of time, the discovery of their special virtue, exploited in various ways according to their availability and needs, enabled the first civilizations to create and advance in epigraphy, sculpture, and architecture.

In Peru and Bolivia, where Palicourea abounds, it was used directly and in abundance in the pre-Inca building industry. In Egypt and outside Africa, I believe that only the acid derived from Dichapetalum was used to carry out smaller, expensive works.

Who by, where, and when that precious resource was identified is not known and the “how” is perhaps trivial. Maybe the ancient peoples really noticed what the birds were doing or they saw the action of the plants themselves. Regardless, ancient craftsmen learned from experience, and, as they had learned to use fire, water, and wind energy, they also discovered plant or animal juices that melted stones, healed, or killed. They observed that strength, realized its potential, and put it to good use.

Yet the real mystery is not how that knowledge was acquired, nor who transmitted it to whom, but how it traveled between such distant continents. Because, if it is impossible to believe in a coincidence like that shown by myths, it is equally impossible to understand its path unless we rethink the past on very different terms. But this is another story to be investigated elsewhere.

I wish I could demonstrate the validity of this hypothesis by giving it proof and concrete and irrefutable evidence. Modern science can do it. I would like those who have asked the same questions about these mysteries to join me in this research and finally give credit to the skills and knowledge of those who preceded us.